Atlas GO Finishing Plaster 25kg

Atlas GO Finishing Plaster is a high-performance, polymer-modified thin-coat finishing plaster designed to deliver a perfectly smooth, paint-ready surface on interior walls and ceilings. Engineered for speed, ease of application, and a flawless finish, this ready-mix plaster is ideal for both renovation and new construction projects where time and surface quality are critical.

Whether applied manually or using a plastering machine, Atlas GO offers excellent workability, strong adhesion, and easy sanding. Its fine-grain formulation ensures a seamless, white finish with minimal effort—reducing the need for additional surface correction before painting or wallpapering.

Key Features & Benefits:

• Ready-to-use – mix with water and apply directly

• Super smooth finish – ideal base for painting or wallpaper

• Machine- or hand-applicable – supports flexible workflows

• Strong adhesion – excellent bond to mineral surfaces and plasterboards

• Easy to sand – simplifies final surface prep

• Extended open time – allows precision in application

• Bright white finish – eliminates the need for thick primer coats

Product Application:

Atlas GO Finishing Plaster is designed for:

• Smoothing interior mineral substrates (cement, lime, gypsum plasters, concrete)

• Finishing gypsum boards and previously primed walls

• Creating a uniform surface before applying paints, wallpapers, or decorative coatings

• Use in residential, commercial, and office interiors

• Professionals who need reliable, consistent, and time-saving finishing results

Because of its ease of use and compatibility with machine application, this product is especially favored by drywall contractors, interior finishers, and general building professionals.

Instructions for Use:

1. Surface Preparation:
   Ensure the substrate is stable, dry, clean, and free of dust or grease. Prime highly absorbent or dusty surfaces with an appropriate Atlas primer.

2. Mixing:
   Gradually add 25 kg of Atlas GO to approx. 8 liters of clean water. Mix mechanically until the compound reaches a homogeneous, lump-free consistency. Let rest for 5 minutes, then remix briefly.

3. Application:
   Apply using a stainless steel trowel or spray machine. Spread the material in a thin, even layer (usually 1–3 mm thick). Smooth the surface as needed during working time.

4. Drying Time:
   Allow the plaster to dry completely—typically 6 to 24 hours depending on layer thickness, room temperature, and humidity.

5. Finishing:
   Once fully dry, sand the surface with fine-grit sandpaper to achieve a smooth, flawless finish. Remove dust before painting.

Atlas GO Finishing Plaster delivers the quality and efficiency modern construction projects demand. Whether you’re finishing hundreds of square meters or renovating a single room, this plaster ensures a top-class surface that’s easy to work with and ready for final decoration.